LGD, LGD-M Linear Gages - SERIES 575 — with Continuous Positio
SERIES 575 — with Continuous Position TrackingThe LGD is Mitutoyo's new, ultra-compact ABS Linear Gagedesigned to fit into very tight spaces. It keeps track of its origin point once set. An EC Counter must also be ordered for readout.
___LGD__LGD_M_Li_49d4f156bad49.jpg
Rating: Not Rated Yet
Description
FEATURES
• Length of SPC cable: 2m (permanently fixed)
• Digimatic Power Supply Unit is required for setting the origin point.
• Special linear ball bearings are used for the spindle guide to ensure a long service life (except for LGD-M).
• Optional thrust stem and tightening nut facilitate setup of the LGD linear gage in holes of the plate.
| SPECIFICATIONS | ||||||
| Metric | ||||||
| Resolution | Range | Order No. | Accuracy | IP protection level | Measuring force | Remarks |
| 0.01mm | 10mm | 575-321 | 0.02mm | IP66 | 1.2N or less | — |
| 575-324 | 0.02mm | IP54 | 1.2N or less | With pneumatic cylinder | ||
| 575-325 | 0.015mm | IP66 | 2.0N or less | LGD-M | ||
| 25mm | 575-322 | 0.02mm | IP66 | 4.6N or less | — | |
| 50mm | 575-323 | 0.03mm | IP66 | 5.7N or less | — | |
| Inch | ||||||
| Resolution | Range | Order No. | Accuracy | IP protection level | Measuring force | Remarks |
| .0005" | .4" | 575-331 | .001" | IP66 | 1.2N or less | — |
| 575-334 | .001" | IP54 | 1.2N or less | With pneumatic cylinder | ||
| 575-335 | .0006" | IP66 | 2.0N or less | LGD-M | ||
| 1" | 575-332 | .001" | IP66 | 4.6N or less | — | |
| 2" | 575-333 | .0012" | IP66 | 5.7N or less | — |
