IDC Series Digimatic Indicators - SERIES 543 — with Green/Red
SERIES 543 — with Green/Red LED and GO/±NG Signal Output Function
Description
FEATURES
- With the max./min. value holding function, the signal IDC canoutput the signal of
the GO/±NG judgment result against the peak values set. Substitute for
the mechanical/electrical contact, the judgment is carried out by calculating
the measurement data obtained. This provides high reliability with no deterioration
of the contact point and volume adjustment.
- Employing the absolute linear encoder, the Signal IDC always displays
the spindle "Absolute Position" from the origin at power-on. Also unlimited
response speed eliminates over-speed errors.
- The signal can be output to an external device like a sequencer through
- The GO/±NG judgment result is also indicated by the green/red LED and
- The Signal IDC achieves the IP54 protection level to resist dust and
Technical Data | |
Display: | LCD |
Functions: | |
• Signal output: | -NG/OK/+NG (judgement result only), NPN open- |
collector,30mA/24V max. output currency/voltage | |
• Remote control: Hold-preset, Preset-recall, Zero-Set | |
• Other functions: Origin-Set, Zero-Set, power on/off, inch/mm conversion (inch/ | |
mm type only), counting direction switching, GO/±NG | |
judgment, max./min./runout value holding | |
Signal cable length: | 4m |
Power supply: | DC12 - 24V±10% |
Stem diameter: | 8mm (ISO/JIS type) or 3/8" (ANSI/AGD type) |
Contact point: | Carbide ball with M2.5x0.45 thread (ISO/JIS type) or steel ball |
with #4-48UNF thread (ANSI/AGD type) | |
Dust/Water protection level: Conforming to IP54 | |
Operation temperature: 0°C to 40°C |
SPECIFICATIONS | |||||||
Metric | |||||||
Resolution | Range | Order No. | Order No. | Accuracy | Measuring | Mass | Remarks |
Back w/lug | Flat-back | force | |||||
0.001mm | 12.7mm | 543-280 | 543-280B | 0.003mm | 2.0N or less | 345g | ISO/JIS type |
Inch/Metric | |||||||
Resolution | Range |
|