Digital Calipers ''MyCal ABSOLUTE''
• Large and clear LCD readout.
• The ZERO/ABS key allows the display to be Zero-Set at any
slider position along the scale for incremental comparison
measurements. This switch will also allow return to the
absolute (ABS) coordinate and display of the true position from
the origin point (usually jaws-closed point).
• Data Hold Unit (959143) is optional.
• Carbide-tipped jaw type calipers are also available.
Technical Data
Display: LCD
Functions: Origin-Set, Zero-Set, power on/off, inch/mm conversion (inch/
mm type only), SPC data output, data hold (optional)
Battery: SR44 (1 pc.) (938882)
Battery life: Approx. 3.5 years under normal use
Maximum response speed: Unlimited
Alarm: Low battery voltage, scale contamination, counting value
composition error
Operating temperature: 0°C to 40°C
SPECIFICATIONS | |||||
Metric | |||||
Range | Order No. | Resolution | Accuracy | Mass | Remarks |
0 - 150mm | 500-151 | 0.01mm | ±0.02mm | 162g | With depth measuring bar (blade) |
500-154* | 0.01mm | ±0.02mm | 162g | With depth measuring bar (blade) | |
500-155** | 0.01mm | ±0.02mm | 162g | With depth measuring bar (blade) | |
500-158 | 0.01mm | ±0.02mm | 162g | With depth measuring rod (ø1.9mm) | |
0 - 200mm | 500-152 | 0.01mm | ±0.02mm | 192g | With depth measuring bar (blade) |
500-156* | 0.01mm | ±0.02mm | 192g | With depth measuring bar (blade) | |
500-157** | 0.01mm | ±0.02mm | 192g | With depth measuring bar (blade) | |
0 - 300mm | 500-153 | 0.01mm | ±0.03mm | 350g | With depth measuring bar (blade) |
0 - 450mm | 500-500-10 | 0.01mm | ±0.05mm | 1170g | — |
0 - 600mm | 500-501-10 | 0.01mm | ±0.05mm | 1350g | — |
0 - 1000mm | 500-502-10 | 0.01mm |
|